Fluke Corporation MET/CAL Procedure ============================================================================= INSTRUMENT: Fluke 8062A: (1 year) CAL VER /5720 DATE: 11-Feb-95 AUTHOR: Fluke Corporation REVISION: $Revision: 1.1 $ ADJUSTMENT THRESHOLD: 70% NUMBER OF TESTS: 47 NUMBER OF LINES: 131 CONFIGURATION: Fluke 5720A ============================================================================= # # Source: # Fluke 8062A instruction manual (P/N 632695, March 1982, Rev. 2, 3/93) # # Compatibility: # MET/CAL 4.0 or later # # Subprocedures: # None # # Required Files: # 57_8062.bmp # # System Specifications: # TUR calculation is based on specification interval of the accuracy file. # The default 5720A accuracy file contains 90 day specs. # # Fluke makes no warranty, expressed or implied, as to the fitness # or suitability of this procedure in the customer's application. # # The 90 day specifications of the 5720A are used in TUR computations. # STEP FSC RANGE NOMINAL TOLERANCE MOD1 MOD2 3 4 CON 1.001 ASK- N P F W 1.002 ASK+ K 1.003 M5720 C2 1.004 HEAD PRELIMINARY INSTRUCTIONS 1.005 DISP Turn on the UUT. 1.005 DISP 1.005 DISP Before performing calibration allow the UUT to stabilize 1.005 DISP (30 min.) @ 23+/-5 degC. Humidity less than 80%. 1.006 HEAD {MICROCOMPUTER AND DISPLAY TEST} 1.007 DISP Use the automatic power-on self-test to test the 1.007 DISP microcomputer and the LCD display. Turn the UUT 1.007 DISP off, then turn it on while observing the display. 1.007 DISP All of the LCD segments should turn on. After one 1.007 DISP or two seconds, the display should go blank briefly 1.007 DISP and then respond to switch selections. 1.008 EVAL Did the {display test} pass? 2.001 HEAD {DC VOLTAGE} 2.002 PIC 57_8062 2.003 HEAD DC VOLTAGE: {200mV Range} 2.004 5720 200 190.00mV 0.11U 2W 3.001 5720 200 -190.00mV 0.11U 2W 4.001 HEAD DC VOLTAGE: {2V Range} 4.002 5720 2 1.9000V 0.0011U 2W 5.001 HEAD DC VOLTAGE: {20V Range} 5.002 5720 20 19.000V 0.015U 2W 6.001 HEAD DC VOLTAGE: {200V Range} 6.002 5720 200 190.00V 0.15U 2W 7.001 HEAD DC VOLTAGE: {1000V Range} 7.002 5720 1000 1000.0V 0.9U 2W 8.001 HEAD {AC VOLTAGE} 8.002 HEAD AC VOLTAGE: {200mV Range} 8.003 5720 200 100.00mV 0.60U 200H 2W 9.001 5720 200 100.00mV 1.40U 20kH 2W 10.001 HEAD AC VOLTAGE: {2V Range} 10.002 5720 2 1.0000V 0.0060U 200H 2W 11.001 5720 2 1.0000V 0.0070U 1kH 2W 12.001 5720 2 1.0000V 0.0070U 10kH 2W 13.001 5720 2 1.0000V 0.0140U 30kH 2W 14.001 5720 2 1.0000V 0.0110U 20H 2W 15.001 5720 2 0.1000V 0.0015U 200H 2W 16.001 5720 2 0.1000V 0.0050U 30kH 2W 17.001 HEAD AC VOLTAGE: {20V Range} 17.002 5720 20 10.000V 0.060U 200H 2W 18.001 5720 20 10.000V 0.520U 10kH 2W 19.001 5720 20 10.000V 0.540U 30kH 2W 20.001 HEAD AC VOLTAGE: {200V Range} 20.002 5720 200 100.00V 0.60U 200H 2W 21.001 5720 200 100.00V 5.20U 10kH 2W 22.001 5720 200 100.00V 5.40U 30kH 2W 23.001 HEAD AC VOLTAGE: {750V Range} 23.002 5720 750 750.0V 16.0U 100H 2W 24.001 5720 750 750.0V 16.0U 1kH 2W 25.001 HEAD {RESISTANCE} 25.002 HEAD RESISTANCE: {200 Ohm Range} 25.003 5720 200 0.00Z 0.04U CW 26.001 5720 200 100.00Z 0.14U CW 27.001 HEAD RESISTANCE: {2 kOhm Range} 27.002 5720 2 1.0000kZ 0.0012U CW 28.001 HEAD RESISTANCE: {20 kOhm Range} 28.002 5720 20 10.000kZ 0.012U CW 29.001 HEAD RESISTANCE: {200 kOhm Range} 29.002 5720 200 100.00kZ 0.12U 2W 30.001 HEAD RESISTANCE: {MOhm Range} 30.002 DISP Set UUT to the MOhm range. 30.003 5720 1.0000MZ 0.0022U 2W 31.001 5720 10.00MZ 0.05U 2W 32.001 HEAD {CONTINUITY TEST} 32.002 5720 2 0.1000kZ 0.0003U CW 33.001 DISP Press the -><-))) button. 33.002 EVAL Is the {-><- symbol visable on the display}? 34.001 DISP Press the -><- button again to enable the audible tone. 34.002 5720 0.1000kZ S CW 34.003 EVAL Is the {audible tone on}? 35.001 5720 * S 35.002 EVAL Is the {audible tone off}? 36.001 EVAL Is the UUT {displaying OL}? 37.001 HEAD {DC CURRENT} 37.002 HEAD DC CURRENT: {200uA Range} 37.003 5720 200 190.00uA 0.59U 2W 38.001 5720 200 -190.00uA 0.59U 2W 39.001 HEAD DC CURRENT: {2mA Range} 39.002 5720 2 1.9000mA 0.0059U 2W 40.001 HEAD DC CURRENT: {20mA Range} 40.002 5720 20 19.000mA 0.059U 2W 41.001 HEAD DC CURRENT: {200mA Range} 41.002 5720 200 190.00mA 1.35U 2W 42.001 HEAD DC CURRENT: {2000mA Range} 42.002 5720 2000 1900.0mA 13.5U 2W 43.001 5720 2000 -1900.0mA 13.5U 2W 44.001 HEAD {AC CURRENT} 44.002 HEAD AC CURRENT: {20mA Range} 44.003 5720 20 19.000mA 0.152U 1kH 2W 45.001 HEAD {DIODE} 45.002 DISP Select the DIODE Function. 45.003 EVAL Is the UUT {displaying OL}? 46.001 5720 1.0000kZ 0.12U CW 47.001 END